Now leasing in Ayden · Brand-new units · Move-in ready
Available UnitsWhat FitsBoat StorageRV and Motorhome StorageContractor Shop SpaceFlex and Warehouse SpaceHow to LeasePhotosQuestionsLocationBook a Tour
Concept of a welding and fabrication shop with a steel table, band saw, drill press and metal racks
Interior shown is a concept rendering.
North Ayden Flex Park · Ayden, NC

Welding and Metal Fabrication Shop Space

Concrete floor, a big door and three-phase power available, about 10 miles from downtown Greenville.

Home › Welding and Fabrication Space

Weld where it makes sense

Mobile welders and small fab shops need three things: power, floor and a door big enough to get the work in and out. North Ayden Flex Park has all three. Units have a concrete floor, a 12 foot wide by 14 foot tall roll-up door plus a walk-in door, and three-phase power is available at the park.

Fit check

  • 1,000 sq ft (20 by 50 feet): a welding table, a band saw, a drill press, a steel rack along one wall and room to back a truck in for loading.
  • 1,500 sq ft (25 by 60 feet): add a trailer build in progress or a second work area.
  • Clear height: 16 feet at the front, 14 feet at the rear.

Before you sign

Bring your equipment list to the tour. We’ll tell you which units already have an electrical panel and what it would take to set up the power you need. Units are delivered as shells, so any new wiring is part of the tenant’s setup, done by a licensed electrician.

Who’s nearby

You’d be sharing the park with other working businesses:

Marine electronics installerAuto detailerPressure washing companyLandscaping companyOnline sellerCustom finishing shop

Want to see one? Book a tour   See what’s open

Questions

Straight answers.

Is three-phase power available for welders?

Yes, three-phase power is available at the park. Which units are set up today varies, so call with your equipment list.

Can I work with the door open?

Yes. Keep your work, tools and material inside your unit and the lot clear.

Can I store steel outside?

No. The park has a no outside storage rule, so steel racks go inside.

Who handles wiring for my machines?

Units are delivered as shells. Any added wiring is part of your setup and should be done by a licensed electrician. We can connect you with a trusted local contractor.

See it in person.

Tell us what you’re storing or running, and we’ll have the right unit open when you pull in.

(252) 684-FLEX
(252) 684-3539 · Call or text
Book a tour
We’ll use this only to contact you about North Ayden Flex Park units and to schedule a tour. View our privacy policy